Technical specification
1. Working pressure: 0-10MPa
2. Testing station: 30 stations
3. Pressure control accuracy: -+1%(Maximum-+0.001 MPa)
4. The pressure value resolution: 0.001 MPa
5. Constant temperature water temperature range: 20 -95 Degree
6. Temperature uniformity: -+1Degree
7. Timer display accuracy: 1s
8. Without the computer, the data can be saved for 8760 hours.
9. The control parameters(pressure time, accuracy)can be input from the micro-control unit at the testing machine or from computer.
10. Power supply: Three phases, suitable for both 380VAC and 220VAC.
11. The machine and the computer can separately or simultaneously display the time (Max. 9999hours 59 minutes 59 seconds)and the pressure(three figures after the point)and eight testing condition(Pressure up, pressure down, pressure compensate, running, end, leakage and exploding ). When the pressure overload, end, leakage and explode take place simultaneously, there is light and voice alarm.
12. The machine has the following function: Observe, analysis, inquire, save, print, testing curve(pressure-time)and starting time, setting time, current time, valid time, invalid time, remaining time, over pressure time, pressure compensating time and etc.
