Cleaning Method of Hot Or Cold Water Cycling Machine
Hot Or Cold Water Cycling Machine is made up of many parts, each part is different, and its maintenance is different naturally. The main parts of the equipment are humidifier, evaporator, circulating air blade, condenser, etc. After the cold and heat shock test box have been used for a long time, there will be accumulated dirt inside and outside the equipment, which needs to be cleaned regularly. Besides the external need to remove dirt and keep it clean, the regular cleaning of the internal parts of the equipment is the most important. Therefore, the internal parts of the equipment should be cleaned timely and accurately in place. The following is a brief introduction to the cleaning methods of these components.
1. Evaporator:
Hot Or Cold Water Cycling Machine has different cleanliness level under strong wind. Then there will be dust, which will condense on the evaporator. It should be cleaned every three months.
2. Humidifier: If the water inside is not cleaned regularly, scales will be produced. The existence of these scales will cause the humidifier to form dry burning when it is working, which will damage the humidifier. So change clean water in time and wash humidifier regularly.
3. Circulating blade: It is the same as an evaporator. Over a long time, it will condense a lot of small dust, and it will be cleaned in the same way as an evaporator.
4. Condenser: Its interior needs decontamination and dust removal to ensure good ventilation and heat transfer performance and continuous heat transfer performance.
Clean maintenance is very important and can not be delayed. The longer it drags on, the worse it will do to the equipment.
